This Constance Belt kit has a wide belt strap in black calfskin leather, reversing to orange Togo leather, accompanied by a removable H buckle with brushed gold-plated hardware.
The H Constance Belt in black calfskin and orange Togo leather with a brushed-gold buckle is a striking accessory. Offers a touch of luxury to any outfit. It's a sought-after piece for H enthusiasts.
Here are the essential tips to ensure you choose the right fit.
1. Aim for the Golden Center Hole
Most standard H straps feature only three holes, spaced exactly 2.5 cm (about 1 inch) apart. When you order your correct centimeter size, the buckle pin will sit perfectly in the middle hole. This leaves you one hole to tighten the belt (if you lose weight or wear thinner fabric) and one hole to loosen it (if you bloat or wear heavier layers).
2. Choose Your Style Placement First
Because your waistline is narrower than your hip line, you must decide how you intend to wear the belt before choosing a size:
High-Waist Style: If you plan to wear it over dresses, blazers, or high-waisted skirts, measure around your narrowest part.
Low-Rise Style: If you plan to loop it through low-slung jeans, measure lower down on your hips.
The Compromise: If you want a single belt to do both, buy the size that fits your lower hips and ask a professional luxury leather smith (or an official Hermès boutique) to punch extra holes closer to the tip so you can tighten it for your waist.
3. Account for Leather Thickness and Buckles
If you are buying a reversible strap (like the classic 32mm or 24mm H-belt), the leather is quite thick and structured.
Round Up: If your exact body measurement falls between sizes (for example, you measure 82 cm), always round up to the next 5 cm increment (Size 85). A belt that is slightly too long looks much better than a belt that cannot reach the first hole.
Buckle Length: Keep in mind that different buckles (e.g., the classic shiny H vs. a brushed metal Constance buckle) add slightly different fractions of length to the overall closure, though H accounts for this in the strap stamping.
Method 1: Measure an Existing Belt (Most Accurate)
Measuring a belt you already own and wear comfortably is the safest way to find your size.
- Lay your favorite belt flat on a hard surface.
- Locate the base of the tongue/pin on the buckle (where the buckle attaches to the leather).
- Measure from that point down the length of the strap to the hole you use the most.
- Note the measurement in centimeters and refer to the size chart
Note: Do not measure the total end-to-end length of the leather strap, as this includes extra material that will skew your size.
Method 2: Measure Your Body
If you don't have a comparable belt, you can use a flexible fabric measuring tape.
- Put on the style of pants or clothing you intend to wear with your new belt.
- Thread the tape measure through your pant loops or wrap it exactly where you want the belt to sit (high waist, mid-waist, or low hips).
- Stand naturally and pull the tape comfortably snug.
- Record the number in centimeters. Round to the nearest 5 cm increment to find your order size. Use the cm size to inches in the sizing chart.
